UK office of IDEA StatiCa s.r.o.
Email: info@ideastatica.uk
Phone: +44 (0) 20 3579 9397

About IDEA StatiCa

We develop software for structural engineers and detailers. Our development team researches, tests, and applies new methods of analyzing the behaviour of structures and their members. Based on this, we created IDEA StatiCa – software that enables engineers to work faster, evaluate requirements of the national code thoroughly, and use the optimal amount of material. For us, creating software is a way to contribute to making every new construction around the world safer and cheaper.

Curved shear wall design with IDEA StatiCa RCS

IDEA StatiCa is mostly known for its unique approach in the design of steel connections, but it’s not only about Steel: it can provide some unique solutions in the design of Concrete and Prestressed structures offering fast and economic design for your everyday engineering work. One of them is IDEA StatiCa RCS, a software for the calculation of reinforced concrete section checks according to EN 1992-1-1 and 1992-2.
In this article, we are presenting a case study of IDEA StatiCa RCS through a real project from one of our customers, which although relatively small-scaled, presents the designer with several challenges that make the calculation of internal forces complex, with the biggest one being the curved concrete walls. The design of such elements usually involves a lot of assumptions, engineering judgment, and a combination of hand calculations with dedicated software that would still not provide complete insight and code compliance. With IDEA StatiCa RCS, you can have a complete solution and design easily any cross-section with extensive code checks.
Preparing the model

The customer has modeled & analyzed this project in SCIA Engineer, and although the curved walls do not pose a problem from a modeling perspective, in terms of design it is not as straightforward as it would be with typical 1D & 2D members. In this situation, it is necessary to use integration members (which essentially integrates 2D stress components and produces equivalent 1D member ones). This allows the designer to comply with the checks of the relevant code provisions.

After the analysis in SCIA Engineer, the results are presented in a tabulated format and can be directly exported to Excel or other software. In the image below, the critical components (in bold font), their locations and their combination are presented. Designing against multiple combinations is important as the section forces are not maximized simultaneously, allowing a more accurate, safe and economical solution to the problem. Moreover, when Serviceability checks are involved, it is very important to classify theses combinations as such to perform the relevant checks.

Design process with IDEA StatiCa RCS

After exporting the results, we are moving to IDEA StatiCa RCS and recreate the curved cross-section geometry. To save time, we can simply import the geometry of the curved wall through a DFX file. Then, with the reinforcement tools of RCS, all rebars are placed in their exact location.

The next step is to import the section forces: 

Via a simple copy/paste procedure from the related table in Scia Engineer. In this particular case, the ULS forces are imported, but, as can be seen in the table, there are multiple tabs allowing the definition of Accidental and other load combinations (Characteristic and Quasi-Static).

Finally, the user can choose the checks: 

That need to be conducted, from a multitude of options covering even specialist cases (prestressed members, bridge-related, container vessels, fire resistance, and fatigue). Once this is done, the user can examine a summary of the results for the chosen checks in the form of tables and failure modes and modify their appearance. Obviously, the user can export and present the results as documents with the press of a button.

Watch the video below for a short intro to IDEA StatiCa RCS:
Want to know more about IDEA StatiCa RCS? Check our Resource Centre
Share on facebook
Share on twitter
Share on linkedin
Share on email


Download a free 14-day trial version

Connection Wednesdays - BIM link IDEA StatiCa and ETABS

Upcoming Webinar!

Join us on Wednesday,
3rd of March 2021 at 10:00am
(GMT) or 5:00pm (GMT) 

Learn how to integrate the ETABS BIM link and run it for the first time!