Don’t let your software limit your project. IDEA StatiCa Concrete helps you check reinforced concrete sections of any shape – typical, unusual, and even general cross-sections.
Discontinuity regions can become a pain to design as there is limited support in the code for them. Our unique underlying analysis methodology can calculate and check these details in minutes. Any number of discontinuities can coexist in a single region. IDEA StatiCa Concrete will handle them, check them and present intuitive results in a comprehensive report.
This functionality allows for the accurate determination of stress development at any construction stage or even the full life of the structure. Our advanced time-dependent analysis (TDA) enables the determination of nonlinear creep and shrinkage effects easily. The designer can exploit this functionality to produce economic designs safely. Our BIM links can even import and check members calculated in a 3D model at your favorite structural analysis package.
Automated calculation of bridge load rating for concrete bridges (road and railway) can be performed for both Ultimate and Serviceability limit states. Our BIM links can import and check the critical members through an automated iterative procedure that saves a lot of time.
Determination of the stress-rangeand fatigue resistance,considering the fatiguestrength of concrete,normal and pre-stressed reinforcement.Fatigue checks are availablefor both road and railwaybridges.
Check of stresses in concrete fibers and reinforcement for short-term and long-term effects.
IDEA StatiCa Concrete checks if the decompression conditions are fulfilled, to make sure that tendons are located into the concrete compression zone.
The code torsion check requires the creation of an equivalent thin-walled cross-section for torsion checks. IDEA StatiCa automatically calculates thissection taking into account the shear reinforcement that is set to resist torsion. The user can visually check check and influence the shape of the thin-walled section.
Check of post and pre-stressed members can quickly become frustrating, even for the simplest cases. IDEA StatiCa simplifies this procedure. Wizards can guide the user to the definition of construction stages and the automatic creation of the corresponding load combinations. Both pre and post processing can coexist in a single member with any tendon geometry (in plan and elevation). IDEA StatiCa Concrete, automatically takes care of time-depended effects like tendon losses, creep, shrinkage and non-linear creep. The designer can focus on the project and even make modification. All definitions mentioned above will automatically adapt to the changes making such designs a snap!
The new IDEA StatiCa version 21.0 will be released in the last week of April. Join us on April 28 for a release webinar to see what is new in connection design and concrete analysis!